Phone: +91-9717083396
Twitter Facebook Email

Tenax - Epoxy / Resin System

Home / Product Range / Tenax / Epoxy - Resin System
  • EPOXY GEL

    EPOXY GEL

    EPOXY GEL is a bi-component transparent knife grade epoxy designed for gluing, laminating, and joining marble, granite, stones, and ceramic. Can be used for indoor as well as outdoor applications. Exceptional strength, great mechanical properties, and weather resistant.

    Density 1.1(part A)/1.0 (part B)
    Ratio weight for use 100(partA):50(partB)
    Processing time 3-4 hours
    Gel time in bulk 10-15 minutes

    PACKING: Available in set of KG 1 (part A) and KG0.5 (part B) in a box containing 3 sets.

  • RIV050(A+B)

    Rivo 50 (A+B) is epoxy glue suitable for gluing and joining marble granite, stone & ceramic. It can be used to join metal - stones, concrete-metal, and ceramic-stone. Infact it will bond to almost any surface. Even polished surfaces will not need to be honed to achieve optimum adhesion. Rivo 50 is designed for permanent application. The stone will break before the bond will. Recommended for both interior and exterior applications. Material must be dry before application. Straw in color.

    Density 1.4(partA)/1.4(partB)
    Ratio weight for use 100 (part A): 100 (part B)
    Processing time 24 hours
    Gel time in bulk 50-60 minutes

    PACKING: Available in a set of LT1 (part A) and LTI (part B)LTI packing in a box containing 3 sets.

    Description: Epoxy systems consists of Resin and hardener combination and are used for filling up micro fissures, cracks etc. on marble.

  • EPOXY SYSTEM FOR MARBLE & GRANITE


    • Grind the floor/marble to grit 120 (i.e., up to stage 0,1,2) and leave them to dry for 2-3 days, so that absolutely no traces of water are found on the floor surface especially on cracks.
    • Mix resin and hardener in the ratio specified by weight and apply the mixture uniformly on the full surface of marble.
    • Accumulate additional quantity of this mixture over the cracks.
    • Leave the slabs to dry for 20-24hrs.
    • Polish these slabs starting from grit 120 (stage 3)
  • TYPES OF EPOXY SYSTEM

    Resin 943 (2 parts) + Hardener MR50L (1 part): The normal epoxy for usual cracks on granite/marble.

    Gel time in bulk 12-15 minutes
    Gel time in thin layer 70-80 minutes
    Processing time 24 hours
  • Resin 943S (4 parts) + Hardener BB25H (1 part): Very low viscosity epoxy system with very good resistance foryellowing. Use on material like Australian white, Thassos, Satvario White etc.

    Gel time in bulk 1 hour
    Gel time in thin layer 2 hour
    Processing time 24 hours
  • Resin 911 (5 parts) + Hardener MR25G (1 part): This epoxy is suitable for light coloured materials like Ghiblee, Raw Silk, and Paradiso where you don't want colour of the material to change.

    Gel time (in minutes) in bulk 5 minutes
    Gel time in thin layer (in minutes)
    at 25�C
    80 minutes
    Processing time 24 hours
  • Resin 963 (3 parts) + Hardener BX35H (1 part): Extremely low viscosity system for resining marble & granite. It has a very good penetration and is useful where fissures and cracks are extremely thin and very high colour darkening is required. This epoxy alone or in combination with Black Tepox colour gives good result on Black granite & Black Pearl.

    Gel time in bulk 4 hours
    Gel time in thin layer at 40�C 5 hours
    Processing time 1 Day
  • Resin 963 Black V (3 parts) + Hardener 12/30 (1 part): This epoxy is good for Black & hard material with thin fissures.

    Gel time in bulk 6 hours
    Gel time in thin layer at 40�C 12 hours
    Processing time 1 Day

    PACKING: KG1 KG5 & KG200 of Resin and Hardener.

  • Resin 914 (5 parts) + Hardener MR20H (1 part): This epoxy is suitable for light coloured materials like Kashmir White, Imperial White, Ghiblee, Raw Silk and Paradiso where you don't want colour of granite to change.

    Gel time (in minutes) in bulk 2-3 minutes
    Gel time in thin layer (in minutes)
    at 25�C
    80 minutes
    Processing time 24 hours
  • Resin 954 (3 parts) + Hardener 123/30 (1 part): This is a medium dark epoxy for filling up thin cracks. It is a softer epoxy and is easy to remove. It is good for materials with chipout problem. It can be used even on not fully dried slabs.

    Gel time (in minutes) in bulk 35-40 minutes
    Gel time in thin layer (in minutes)
    at 25�C
    215 minutes
    Gel time in thin layer (in minutes)
    at 40�C
    2 hours
    Processing time 24 hours
  • Resin 943 (3 parts) + hardener BB30H (1 part): Very low viscosity epoxy system with very good shine for Italian beige marble.

    Gel time in bulk 2 hour 30 minutes
    Gel time in thin layer 3 hour
    Processing time 24 hours
  • Resin 954 (4 parts) + Hardener BB25G (1 part): This epoxy is of low viscosity and high penetration. Accordingly, it tills thin fissures and also improves the colour of the marble. Good for Katni marbles and other hard marbles.

    Gel time in bulk 1 hour 30 minutes
    Gel time in thin layer 2 hour 30 minutes
    Processing time 24 hours
  • Glaxs Resin BB + Hardener 60% or 65%: Transparent Resin, solvent free with low viscosity and good shine. Completely invisible and doesn't create change of colour and shadow around the cracks. We guarantee that this Resin will not turn yellow even after 15 years exposure to sunlight. Use on expensive White marbles and Onyx.

    Gel time in bulk 30-35 minutes
    Gel time in thin layer 1 hour 45 minutes
    Processing time 24 hours

    PACKING: KG 1 KG5 & KG200 of Resin and Hardener.

  • Resin 943 (5 parts) + Hardener MR20H (1 part): This epoxy is suitable for transparent results except white based material. Suitable for Paradiso, Madurai colours, etc.

    Gel time (in minutes) in bulk 5 minutes
    Gel time in thin layer (in minutes)
    at25�C
    80 minutes
    Processing time 24 hours
  • Resin 943 (4 parts) + Hardener MA25H (1 part): Low viscosity with high reactivity. It is used for light colour darkening.

    Gel time (in minutes) in bulk 18-20 minutes
    Gel time in thin layer (in minutes)
    at 40�C
    150 minutes
    Processing time 24 hours
  • Resin 952 (2 parts) + Hardener MR50L (1 part): The normal epoxy for usual cracks on granite. Also improves the colour of granite.

    Gel time (in minutes) in bulk 11 minutes
    Gel time in thin layer (in minutes)
    at 25�C
    110 minutes
    Processing time 24 hours
  • Resin 954 (4 parts) + Hardener BB25G (1 part): Low viscosity epoxy with long gel time. It gives medium colour darkening.

    Gel time (in minutes) in bulk 80 minutes
    Gel time in thin layer (in minutes)
    at 40�C
    180 minutes
    Processing time 24 hours
  • Resin 963 (4 parts) + Hardener BB25G (1 part): Very thin epoxy with good colour darkening. This epoxy is useful for colours like Multicolour, Tan Brown, Yellow based granites or any other coloured granite where a good colour darkening is required.

    Gel time (in minutes) in bulk 1 hour 30 minutes
    Gel time in thin layer (in minutes)
    at 25�C
    3 hours
    Processing time 24 hours
  • Resin 963 (3 parts) + Hardener BM30G (1 part): Used for filling very thin cracks. Causes more colour darkening. Suitable for Madurai colour material like Kashmir gold, Madura gold, Vyara gold.It is good for yellow based material. Small amount of yellow colour can also be mixed for more yellowing.

    Gel time (in minutes) in bulk 45 minutes
    Gel time in thin layer (in minutes)
    at 40�C
    2 hours 45 minutes
    Processing time 24 hours
  • COLOURS

    COLOURS

    Available in paste form in Red, Black, Brown, White, Green, Beige, Blue and Yellow colours in a tube of 200gm. Also available in liquid form in LT1 packing. These colours are used for mixing with epoxy systems as per requirement.